Emco Vertical VT 160
Emco Vertical VT 160

Emco Vertical VT 160

EQUIPMENT

Highly dynamic drive unit
Two track loading, quick and flexible automation with short cycle times
Chip-to-chip times up to 5.5 sec.
Small footprint Strong guide rail concept for maximum stability / BG 45
Driven tools and Y axis +/- 65 mm Siemens controller 828D
Made in the Heart of Europe

Technical data

Work area
Travel in X/Y/Z 620 / +/-65 / 310 mm
Max. turning diameter 160 mm
Swing over bed 160 mm
Rapid motion speeds in X/Y/Z 60/15/30 m/min
Feed force in X/Y/Z 6000/6000/6000 N
Main spindle
Max. speed 7000 U/min (Motorspindel)
Spindle nose A 2-5
Max. drive power 21 kW (motor spindle)
Max. torque 150 Nm
Tool turret
VDI size 30
Number of tools 12
Driven tools 12
Max. speed 5000 rpm
Max. drive power 6,7 kW
Max. torque 25 Nm

Highlights

  • Highly dynamic drive unit

  • Two track loading, quick and flexible automation with short

  • cycle times

  • Chip-to-chip times up to 5,5 sec.

  • Small footprint

  • Strong guide rail concept for maximum stability / size 45

  • Driven tools and Y axis +/- 65 mm

  • Siemens control 828D

  • Made in the Heart of Europe

Work area with multifunctional plate

Work area with multifunctional plate
View image

Tool turret

Tool turret
View image

Machining main spindle

Machining main spindle
View image

Overall dimensions/Work space

Installation plan EMCO VERTICAL VT 160

Installation plan EMCO VERTICAL VT 160
View image

Work space EMCO VERTICAL VT 160

Work space EMCO VERTICAL VT 160
View image

Workpieces

Examples of use

  • Part machining for small, medium and large lot sizes
  • Complete machining with Y axis and driven tools

Wheel hub

Wheel hub
View image

V-belt pulley

V-belt pulley
View image

Belt pulley

Belt pulley
View image

Versions

Gesamtansicht VT 250

View image

Arbeitrsraum VT 250

Arbeitsraum mit angetriebenen Werkzeugen
View image

Spindelstock

Spindelstock mit Gewichtsausgleich
View image

EMCO VERTICAL VT 160 M(ISM)

Basic machine with driven tools and integrated spindle motor
View image

EMCO VERTICAL VT 160 MY (ISM)

Machine with driven tools, Y axis and integrated spindle motor
View image

Options/Accessories

Hochdruck-Kühlmittelpumpe

Kühlmitteldurchführung durch die Spindel über Deublin-Drehdurchführung bis maximal 70 bar. Das Kühlmittel wird direkt durch die Spindel auf die Schneide geführt.
View image
Electronic handwheel - CNC

Electronic handwheel - CNC

For moving the machine’s axes manually to set zero point and tool offsets.
View image Electronic handwheel - CNC
High pressure coolant pump LM 600

High pressure coolant pump LM 600

Via a rotary coupling the tools are provided with a coolant (coolant through spindle system) with a 20 or 70 bar high pressure pump.
View image High pressure coolant pump LM 600

Software/Control

Sinumerik 828D - incl. ShopTurn

High performance CNC control for ultimate accuracy and machining speed. SINUMERIK 828D and SINAMICS drive and motors are perfectly tailored for state of the art turning machines. Powerful CNC-functions combined with a unique 80bit NANOFP Accuracy (80 bit floating point accuracy from the position control to the internal encoder resolution) enable highest work-piece accuracy at a minimum of machining time. With a flexible CNC programming language and the state of the art ShopTurn machining step programming, single parts as well as large batch series can be programmed and machined with maximum effectiveness. Due to powerful kinematic transformations and a large set of technological cycles, SINUMERIK 828D also meets the demands of high sophisticated machine applications with driven tools and sub-spindle. Source picture and text: Siemens

Show details Hide details

Download

Vertical_turning_machines_with_integrated_automation.pdf

07.06.2022
Preview Download

EMCONNECT_Your_guide_in_technology.pdf

08.07.2024
Preview Download

EMCO privacy setting

Privacy Policy | Imprint

We, EMCO GmbH (headquarters: Austria), would like to process personal data with external services. This is not necessary for the use of the website, but enables us to interact even more closely with you. If desired, please make a selection:

Analysis / Statistics (1 Service)

Anonymous evaluation for error correction, further development and personalised ads.
Google Analytics

Google LLC, USA

 INFO
Other contents (4 Services)

Integration of additional information
EMCO Career Portal

eRe­crui­ter GmbH, Austria

 INFO
Evalanche

SC-Networks GmbH, Germany

 INFO
Google Maps

Google LLC, USA

 INFO
YouTube

YouTube LLC, USA

 INFO
Accept all Accept selection Accept nothing
Service: Google Analytics

Purpose: Error analysis, statistical evaluation of our website
Processing operations: Collection of connection data, data of your web browser and data on the contents called up; execution of analysis software and storage of data on your end device, anonymization of the collected data; evaluation of the anonymous data in the form of statistics
Storage period: Data on your end device for up to two years
Joint responsible party: Google LLC, Amphitheatre Parkway, Mountain View, CA 94043, USA
Legal basis for data processing: voluntary, at any time revocable consent
Consequences of non-consent: No direct effect on the function of the website; however, limited possibilities for further development and error analysis
Legal basis for data transfer to the USA: Implementing decision of the EU Commission C/2016/4176 and the Privacy Shield certification

Name Description Storage period
_ga

Used to distinguish users in Google Analytics 4.

 2 Years
_gid

This cookie is used by Google Analytics to store and update a unique value for each page visited.

 1 Day
_gat

Used by Google Analytics to throttle the request rate, which means that the collection of data on high-traffic websites is restricted.

 1 Day
_ga_AW-959191631

Used to maintain the session status.

 2 years
Back
Service: EMCO Career Portal

Purpose: Provision of a career portal
Processing operations: collection and processing of personal data by eRecruiters for application procedures
Storage period: until you leave the website
Joint responsible: eRecruiter GmbH, Am Winterhafen 4, 4020 Linz, Austria
Legal basis for data processing: voluntary consent, revocable at any time
Consequences of non-consent: The career portal is not made available to you.

Name Description Storage period
__RequestVerificationToken

Saves a token for verification of the following requests.

 Session
Back
Service: Evalanche

Purpose: Provision of a form for newsletter registration
Processing operations: Collection of connection data, data of your web browser and data about the contents called up; execution of analysis software and storage of data on your end device, anonymization of the collected data; evaluation of the anonymous data in the form of statistics
Storage period: Data on your end device up to two years.
Jointly responsible: SC-Networks GmbH, Würmstraße 4, 82319 Starnberg
Legal basis for data processing: voluntary, at any time revocable consent
Consequences of non-consent: No direct effect on the functioning of the website

Name Description Storage period
ewafutano

Tracking (anonymous history)

 2 Years
Back
Service: Google Maps

Purpose: To display the map service Google Maps
Processing operations: Collection of connection data, data of your web browser and data on the contents called up; placement of advertising cookies by Google; processing of the collected data by Google
Storage period: until you leave the website
Jointly responsible: Google LLC, Amphitheatre Parkway, Mountain View, CA 94043, USA
Legal basis for data processing: voluntary, at any time revocable consent
Consequences of non-consent: The Google Maps service is not made available to you.
Legal basis for data transfer to the USA: Implementing decision of the EU Commission C/2016/4176 and the Privacy Shield certification

Back
Service: YouTube

Purpose: Integration of external videos
Processing operations: Collection of connection data, data of your web browser and data about the contents called up; execution of analysis software and storage of data on your end device, anonymization of the collected data; evaluation of the anonymous data in the form of statistics
Storage period: Data on your end device up to one year.
Joint Controller: YouTube LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA
Legal basis for data processing: voluntary, revocable consent
Consequences of non-consent: No playback of embedded videos.
Legal basis for the data transfer to the USA: Implementing decision of the EU Commission C/2016/4176 and the Privacy Shield certification

Name Description Storage period
yt-remote-device-id

Saves the user settings when retrieving a YouTube video integrated on other websites

 Permanent
yt-remote-connected-devices

Saves the user settings when retrieving a YouTube video integrated on other websites

 Permanent
yt-remote-session-app

Saves the user settings when retrieving a YouTube video integrated on other websites

 Session
yt-remote-cast-installed

Saves the user settings when retrieving a YouTube video integrated on other websites

 Session
yt-remote-session-name

Saves the user settings when retrieving a YouTube video integrated on other websites

 Session
yt-remote-fast-check-period

Saves the user settings when retrieving a YouTube video integrated on other websites

 Session
VISITOR_INFO1_LIVE

Trying to estimate user bandwidth on pages with integrated YouTube videos.

 179 Days
YSC

Registers a unique ID to keep statistics of the YouTube videos that the user has seen.

 Session
GPS

Registers a unique ID on mobile devices to enable tracking based on GPS geographic location.

 1 Day
Back